Ikelite 15' TTL Extension Cord
$ 99.95 - Sold Out
Ikelite 15' Sync Cord Extention - 410215
Non-coiled 15 ft (4.5 m) long extension cord with Ikelite-style bulkhead on one end and Ikelite-style strobe plug on the other end. Use to position your strobe in a location farther from your housing than accommodated by a normal coiled cord.
Communicates TTL signal when used with compatible strobe, housing and sync cord. The Ikelite-style bulkhead and plug are widely recognized as the most reliable waterproof strobe sync connections available. Built-in strain reliefs reduce stress on cord ends.
Ikelite 3' Sync Cord Extension
$ 89.95
Ikelite 3' Sync Cord Extension - 410203
Non-coiled 3 ft (91 cm) long extension cord with Ikelite-style bulkhead on one end and Ikelite-style strobe plug on the other end. Use to position your strobe in a location farther from your housing than accommodated by a normal coiled cord.
Communicates TTL signal when used with compatible strobe, housing and sync cord. The Ikelite-style bulkhead and plug are widely recognized as the most reliable waterproof strobe sync connections available. Built-in strain reliefs reduce stress on cord ends.
Â
Â
Ikelite Fiber Optic Coiled Cord
$ 80.00
Ikelite Fiber Optic Coiled Cord - 4501
Features multi-core fiber optic cable for optimum signal transmission and built-in strain relief. Compatible with Fiber Optic Adapter for DS strobes and any Ikelite housing featuring fiber optic ports. Also compatible with SEA&SEA- and Olympus-type fiber optic connections.
Ikelite Non-TTL Dual Sync Cord for Sea & Sea/INON Strobes to Ikelite
$ 179.95
 Ikelite Non-TTL Dual Sync Cord for Sea & Sea/INON Strobes to Ikelite - 41182
Y-shaped sync cord with an Ikelite-style plug on the housing end and SEA&SEA / INON-style plugs on the strobe ends. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
SEA&SEA / INON strobes are unable to power the TTL circuitry in our housings. Thus, these strobes will operate in Manual exposure settings only. TTL communication through Ikelite housings is not supported by SEA&SEA / INON strobes.
This cord requires the attachment of two strobes for waterproof operation. To shoot with only one strobe, try a single sync cord instead.
Â
Â
Ikelite Non-TTL Sync Cord for Ikelite to a Sea & Sea/Inon Strobe
$ 109.95
Ikelite Non-TTL Sync Cord for Ikelite to a Sea & Sea/Inon Strobe - 41181
Coiled sync cord with an Ikelite-style plug on the housing end and SEA&SEA YS / INON-style plug on the strobe end. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
SEA&SEA / INON strobes are unable to power the TTL circuitry in our housings. Thus, these strobes will operate in Manual exposure settings only. TTL communication through Ikelite housings is not supported by SEA&SEA / INON strobes.
To connect two strobes to a single housing bulkhead, use a Dual Sync Cord instead.
Â
Â
Ikelite NT1 TTL Hotshoe for Nikon DSLR
$ 74.95
Ikelite NT1 TTL Hotshoe for Nikon DSLR - IK46061
Â
Â
Ikelite NT1B Nikon TTL Hotshoe & Bulkhead Set
$ 109.95
Ikelite NT1B Nikon TTL Hotshoe & Bulkhead Set - IK46062
Ikelite Product Number 46062
Â
Â
Ikelite Remote Optical Slave Converter for DS Strobes
$ 124.95
Ikelite Remote Optical Slave Converter for DS Strobes - 4403
For SEA&SEA or Nauticam housings with internal fiber-optic flash triggering devices, we recommend the Fiber Optic Converter, see below.
Ikelite Sync Cord Two Ikelite Strobes to Ikelite Bulkhead (Updated)
$ 160.00
Ikelite Sync Cord Two Ikelite Strobes to Ikelite Bulkhead (Updated)
Overview
Y-shaped sync cord with Ikelite-style plugs on all ends. Supports TTL operation with any compatible system featuring an Ikelite-style electrical bulkhead and two DS strobes. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
This cord is a direct replacement for the prior version # 4103.52. The Ikelite plugs now feature hard anodized aluminum fittings. Overall the cord is significantly lighter while maintaining the same durability as the original nickel plated brass product.
Compatible with all Ikelite housings featuring an electrical bulkhead, Ikelite TTL Converters, and select housings from other manufacturers that have been upgraded with an Ikelite electrical bulkhead.
To connect two strobes to a single housing bulkhead, use a single sync cord # 45151 instead.
In the Box
Sync Cord
(3) Connector Protector Ikelite end # 0301.12
Silicone Lubricant 1cc 1cc tube
Â
Ikelite to Ikelite TTL Sync Cord
$ 99.95
Ikelite to Ikelite TTL Sync Cord - 410351
Coiled sync cord with Ikelite-style plugs on both ends. Provides TTL operation with any compatible system featuring an Ikelite-style electrical bulkhead and DS strobe. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
To connect two strobes to a single housing bulkhead, try a dual sync cord instead.
Â
Â
Ikelite to Nikonos N5 Non-TTL Dual Sync Cord
$ 179.95
Ikelite to Nikonos N5 Non-TTL Dual Sync Cord - 410432
Y-shaped sync cord with Ikelite-style plugs on strobe ends and Nikonos-style plug on housing end. Provides manual strobe operation with any compatible system featuring a Nikonos-style N5 TTL bulkhead and two Ikelite strobes. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
This cord is compatible with all Nikonos, film and digital TTL systems.
This cord requires the attachment of two strobes for waterproof operation. To shoot with only one strobe, try a single sync cord instead.
Ikelite to Nikonos N5 Non-TTL Sync Cord
$ 109.95 - Sold Out
Ikelite to Nikonos N5 Non-TTL Sync Cord - 410431
Coiled sync cord with an Ikelite-style plug on strobe end and Nikonos-style plug on housing end. Provides manual strobe operation with any compatible system featuring a Nikonos-style N5 TTL bulkhead and Ikelite strobe. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
This cord is compatible with all Nikonos, film and digital TTL systems.
To connect two strobes to a single housing bulkhead, try a dual sync cord instead.
Ikelite to Nikonos N5 TTL Dual Sync Cord
$ 179.95
Ikelite to Nikonos N5 TTL Dual Sync Cord - 410462
Y-shaped sync cord with Ikelite-style plugs on strobe ends and Nikonos-style plug on the housing end. Provides TTL operation with any compatible system featuring a Nikonos-style N5 TTL bulkhead and Ikelite strobe. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
This cord is compatible with Nikonos, film and digital TTL systems. Do not use this cord with non-TTL systems. If unsure, contact your housing manufacturer or choose a non-TTL sync cord.
This cord requires the attachment of two strobes for waterproof operation. To shoot with only one strobe, try a single sync cord instead.
Ikelite to Nikonos N5 TTL Sync Cord
$ 99.95
Ikelite to Nikonos N5 TTL Sync Cord - 41046
Coiled sync cord with an Ikelite-style plug on strobe end and Nikonos-style plug on housing end. Provides TTL operation with any compatible system featuring a Nikonos-style N5 TTL bulkhead and Ikelite strobe. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
This cord is compatible with Nikonos, film and digital TTL systems. Do not use this cord with non-TTL systems. If unsure, contact your housing manufacturer or choose a non-TTL sync cord.
To connect two strobes to a single housing bulkhead, try a dual sync cord instead.
Ikelite to Sea & Sea Motomarine TTL Sync Cord
$ 39.00 - Sold Out
Ikelite to Sea &Â Sea Motomarine TTL Sync Cord - 41047
Ikelite TTL Converter for Nikon DSLR with Ikelite Connector (Version 2)
$ 374.95
Ikelite TTL Converter for Nikon DSLR with Ikelite Connector (Version 2) - IK43013
Ikelite TTL Dual Sync Cord for Sea & Sea/INON Morotmarine II/II-EX
$ 144.00
Ikelite TTL Dual Sync Cord for Sea & Sea/INON Morotmarine II/II-EX - 410472
Ikelite Pruduct Number 4104.72
- Connect Two Ikelite TTL Substrobes to one Sea& Sea Motormarine II or II-EX camera
- Different model TTL Substrobes can be combined
- The strobes will fire in TTL automatic or manual exposure modes
Â
Â
Ikelite Universal Fiber Optic Mount Kit for Underwater Housings
$ 24.95
Ikelite Universal Fiber Optic Mount Kit for Underwater Housings - 4402
Provides an easy way to add fiber optic ports to almost any existing housing. Simply cut to size and adhere to the housing in front of the camera's built-in flash. Provides two ports for the attachment of one or two fiber optic cords. For best results, use in conjunction with your housing's flash deflector to avoid backscatter.
Speedotron Phone plug to flat blades adapter for power supplies
$ 29.95
Speedotron Phone plug to flat blades adapter for power supplies
Overview
Converts any standard Flat Blade slave or sync connector to a 1/4-inch monoplug. It can also be used to make any standard Flat Blade mounting slave compatible with European-style or other monoplug sync jacks.
Â
Â
