Canon Battery Grip BG-E20 for 5D Mark IV
$ 299.99
Canon Battery Grip BG-E20 for 5D Mark IV
MFR SKU: 1485C001 | Helix SKU: CA1485C001
Overview
This large capacity battery grip is powered by two Battery Pack LP-E6 batteries or an optional DC Coupler DR-E6 and AC Adapter AC-E6N. It features a variety of operating controls, and is ideal for high volume and vertical shooting.
Features:
- Comfort and Control in Vertical Position
- Vertical Position Shutter Release Button
- Vertical Position Control Buttons
- Holds Up to Two LP-E6/LP-E6N Batteries
- Extends Shooting Time
- Camera Alignment Pin Hole
- Dust- and Water-Resistant Construction
Canon Battery Grip BG-E11
$ 490.00 - Sold Out
Canon Battery Grip BG-E11
Canon SKU: 5261B001 | Helix SKU: CA5261B001
Overview
The Canon BG-E11 Battery Grip is an optional battery grip with improved ergonomics designed specifically for the Canon EOS 5D Mark III. It allows users to load a choice of one or two LP-E6 battery packs. With two packs, the already-impressive battery life is doubled, compared to using a single LP-E6 pack in-camera. This is especially useful when taking advantage of the camera's movie mode or Live View mode - operating modes that use more power. In addition, with the included battery magazine, you can also run the camera off six AA batteries. The BG-E11 also provides full vertical shooting controls, which can be independently turned on or off as the photographer needs to enhance camera handling, especially for shooting vertical pictures. It has a large number of operating controls as well: shutter button, Main Dial, multi-controller, AF point selection button, AE lock/FE lock button, AF start button, and multi-function button.
Canon Battery Grip BG-E14
$ 216.00 - Sold Out
Canon Battery Grip BG-E14
Canon SKU: 8471B001 | Helix SKU: CA8471B001
Overview
For EOS 70D and 80D Cameras
Comfort and Control in Vertical Position
Vertical Position Shutter Release Button
Vertical Position Control Buttons & Dial
Extends Shooting Time
Holds Two LP-E6 Batteries
Also Works with Six AA Batteries
Accepts ACK-E6 AC Adapter Kit
In the Box
Canon Battery Grip BG-E18 0050C001
$ 220.00
Canon Battery Grip BG-E18 0050C001
Canon Battery Grip BG-E21 for 6D Mark II
$ 199.99
Canon Battery Grip BG-E21 for 6D Mark II
MFR SKU: 2130C001 | Helix SKU: CA2130C001
Overview
This large capacity battery grip is powered by two Battery Pack LP-E6N/LP-E6 batteries or an optional DC Coupler DR-E6 and AC Adapter AC-E6N. It features a variety of operating controls,and is ideal for high volume and vertical shooting.
Features
- Comfort and Control in Vertical Position
- Vertical Position Shutter Release Button
- Vertical Position Control Buttons
- Holds Up to Two LP-E6/LP-E6N Batteries
- Extends Shooting Time
- Camera Alignment Pin Hole
- Dust- and Water-Resistant Construction
Nikon MB-D14 Multi Battery Power Pack
$ 259.95
Nikon MB-D14 Multi Battery Power Pack
Nikon SKU: 27065 | Helix SKU: NK27065
Overview
Specifications
Compatible with D600 and D610 Cameras.
Nikon MB-D16 Battery Grip
$ 339.95
Nikon MB-D16 Battery Grip
Nikon SKU: 27154 | Helix SKU: NK27154
Overview
The MB-D16 Multi Battery Power Pack can be powered either by six AA batteries (Alkaline or Ni-MH or Lithium), or EN-EL15 rechargeable Li-ion batteries. To use the MB-D16 with AA batteries, use the MS-D16 AA Battery Holder. To use the MB-D16 with AA batteries, use the MS-D14 AA Battery Holder. When using EN-EL15 batteries to power the MB-D16, use the MS-D14EN Battery Holder.
The MB-D16 is equipped with a shutter-release button, AE/AF lock button, multi selector, and main- and sub-command dials for improved operation when taking photographs in portrait (tall) orientation.
Nikon MB-D17 Battery Grip
$ 369.95 - Sold Out
Nikon MB-D17 Battery Grip
Nikon SKU: 27169 | Helix SKU: NK27169
Key Features
Nikon MB-D18 Multi Battery Power Pack
$ 399.95
Nikon MB-D18 Multi Battery Power Pack
Nikon SKU: 27188 | Helix SKU: NK27188
Overview
Nikon MB-N11 Power Battery Pack
$ 399.95 - Sold Out
Nikon MB-N11 Power Battery Pack
Mfr SKU: 27215 | Helix SKU: NK27215
Overview:
For the portrait shooter who needs to shoot vertically, the landscape photographer recording lengthy time-lapse sequences and the sports photographer desiring a more balanced feel while using long lenses, the MB-N11 is the ideal accessory. Designed specifically for the Nikon Z 7II and Z 6II mirrorless cameras, the MB-N11 is a Multi-Power Battery Pack with vertical shutter button, main and sub command dials, AF-ON button, sub selector and Fn buttons. Plus, when using two EN-EL 15c batteries, the MB-N11 provides 1.9x (CIPA standard). Increase in battery performance over an EN-EL 15c battery in the camera alone. And the batteries are hot-swappable, meaning you won’t have to stop shooting or recording to swap batteries!
The MB-N11 also features an improved grip and dust and drip protection like that of the rest of the Z series cameras. In addition to powering the camera, the MB-N11 features a USB-C connection which means you can power the batteries from a portable charger or AC power supply, even while connected to a computer. Or charge the batteries within the grip via USB when you’re not using the camera.
The MB-N11 is powered by two EN-EL 15 series rechargeable Li-ion batteries and can accept EN-EL 15, EN-EL 15a, EN-EL 15b and EN-EL 15c batteries. While the most performance increase will be seen using two EN-EL 15c batteries, you can use any combination of the batteries to power the unit. You can even use the MB-N11 with only one battery inserted—in either chamber A or B.
When the battery in chamber A is exhausted, the camera will switch to the battery in chamber B. The hot-swap system allows for replacement of the battery closest to the door (battery A) with no interruption to shooting as long as the battery in chamber B has enough power to keep the camera on.
Other features include battery power level check for each battery in the camera, a socket for connectivity to a tripod and the ability to use the optional EH-7P Charging AC Adapter to charge the EN-EL15c batteries while inserted into the unit, whether its attached to the camera or not.
Stills: Measured at 23 °C/73.4 °F (±2 °C/3.6 °F) with a NIKKOR Z 24–70mm f/4 S lens under the following test conditions: one photograph taken at default settings once every 30 sec.
Movies: Measured at 23 °C/73.4 °F (±2 °C/3.6 °F) with the camera at default settings and a NIKKOR Z 24–70mm f/4 S lens under conditions specified by the Camera and Imaging Products Association (CIPA).
Features:
- For Z 6 II and Z 7 II Cameras
- Accepts Two EN-EL15 Batteries
- Hot-Swappable Battery Slot
- Extended Grip for Vertical Composition
- Second Shutter Release, Dials, Fn Button
- USB Type-C Port for Power or Tethering
Specifications:
| Battery Type | 2 x Battery Pack (EN-EL15) |
| Package Weight | 1 lb |
| Box Dimensions (LxWxH) | 7 x 5.5 x 4.5" |
Sony Vertical Grip VGC3EM for α9, α7R III, α7 III
$ 349.99 $ 299.99
Sony Vertical Grip for α9, α7R III, α7 III
Sony SKU: VG-C3EM | Helix SKU: SYVGC3EM
Overview
Equal vertical and horizontal operability
VG-C3EM body design makes it almost equally easy to control the camera in vertical and horizontal positions, thanks to keys and controls that are nearly the same as those on the back of the camera body. For example, the vertical grip provides a Multi Selector for fast selection of an AF point.
Grip shape for assured hold
VG-C3EM has a grip shape, which allows you to get an enhanced hold for confident shooting in vertical position that is virtually the same as that in horizontal position.
Nearly 2x longer stamina
VG-C3EM vertical grip loads two NP-FZ100 batteries in its housing. You can check the camera LCD monitor to see the remaining power of the battery in use as a percentage (1% minimum unit) on the power indicator. When the power of one battery runs out, the other battery automatically switches on to continue operation.
USB power charging via camera body
You can charge batteries loaded in the vertical grip, using the camera’s USB port without detaching the grip from the camera body.3
Highly rigid magnesium for exterior
Made of magnesium alloy, the same as α9, this grip is highly rigid and lightweight.
Notice
The simultaneous installation of this unit with the LA-EA2/EA4 mount adapter is not supported. If both are installed at the same time, the narrow clearance between the unit and the lens mount adapter makes it hard to hold the grip.
