Ikelite DS-160 Strobe Front Only
$ 599.95 - Sold Out
Ikelite DS-160 Strobe Front Only - 40602
Ikelite DS161 Strobe Kit with Sync Cord + Arm / NiMH 4061.35
$ 1,399.95 - Sold Out
Ikelite DS161 Strobe Kit with Sync Cord + Arm / NiMHÂ
The DS161 combines power with wide angle coverage to give you the most bang for your buck. This kit provides everything you need to add a strobe to any Ikelite TTL system for Compact Digital, Mirrorless, or DSLR camera.
The quality of light is exceptional due to a round flash tube and custom powder coated reflector designed specifically to deliver the softest, most even coverage possible. Strobes with a straight flashtube may be capable of high powers, but require the addition of a diffuser to spread out their sharp, rectangular beam pattern and reduce the harsh hot spot. The DS161 beam is designed to be perfectly soft and wide spread through its reflector design, and is capable of providing you the coverage and power you want and avoiding the one f/stop loss caused by adding a diffuser.
DS160 and DS161 strobes are legendary for their ability to keep up in rapid firing situations—a cut above any flash on the market. Electrical sync connection and a high-capacity battery pack provide the speed you need to capture fast moving subjects like sharks and sailfish at just the right millisecond.
When combined with a compatible TTL system, the DS161 automatically adjusts brightness to provide perfect exposure whether you're shooting macro, portrait or wide angle. Focus on your camera settings and composition and enjoy the increased number of flashes and even faster recycle time you'll get when working with a TTL system.
Â
Â
Â
Ikelite DS51 Underwater Strobe
$ 449.95
Ikelite DS51 Underwater Strobe
Ikelite SKU: 4044.1 | Helix SKU: 40441
Overview
The size and weight of the DS51 make it the perfect choice for the traveling underwater photographer. The DS51's intensity and angle of coverage are comparable to any strobe in its class.
The strobe can easily switch between TTL/Auto and any of the six manual power settings through a large, easy-to-turn dial on the rear of the strobe.A simple battery door is easy to remove and replace and provides a clear view of the o-ring seal. The strobe's battery compartment is independently sealed from the electronics preventing further damage in the event of a flood.
When combined with a compatible Ikelite digital TTL system or film TTL system, the DS51 automatically adjusts brightness to provide perfect exposure whether you're shooting macro, portrait or wide angle.
Specifications
300 ft (90 m) depth rating
TTL mode with compatible Ikelite TTL systems
Manual power modes in 6 1/2-stop increments
Color temperature 5700K
Guide number 17 m at ISO 100
Coverage angle 70° without diffuser - 80° with diffuser
Recycles in 3.5 seconds or less
Accepts 4 AA cell Alkaline, Li-ion, NiMH or NiCad batteries (not included)
Dimensions 3.2 x 4.7 in (81 x 119 mm)
Weight 20 oz (590 g)
Neutral buoyancy in fresh water
In the Box
DS51 strobe
1" Ball Mount # 4081.4
Diffuser # 0561.2
Waterproof Bulkhead Cap # 9104.5
Silicone Lubricant 1cc tube
2 year manufacturer warranty
Documentation
Ikelite Fiber Optic Converter for DS Strobes (3rd Gen)
$ 125.00
Ikelite Fiber Optic Converter for DS Strobes (3rd Gen)
Ikelite SKU:Â 4401.3 | Helix SKU: 44013
Overview
Converts the electrical bulkhead of any Ikelite DS strobe into a fiber optic port.
Updates
This 3rd Generation of the Fiber Optic Converter features a hard anodized aluminum plug connection which reduces weight without sacrificing durability. It is recommended for use with any Ikelite strobe produced September 2018 or later with a hard anodized aluminum bulkhead.
Like the 2nd Generation model, this Fiber Optic Converter features heightened sensitivity for use with SEA&SEA or Nauticam housings with internal electrical-to-optical flash triggering devices. These devices translate the camera's electrical signals into a series of LED flashes which are much less bright than a traditional built-in camera flash. The Fiber Optic Converter is also compatible with any system where the camera's built-in flash can be seen by a fiber optic cord.
Attachment and Use
The Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote triggering.Â
The Fiber Optic Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure. This adapter is a manual exposure (non-TTL) trigger only. The strobe's output may be adjusted using the manual power settings built into the strobe (varies by model).Â
An individual Fiber Optic Converter and compatible cord is needed for each strobe. Use of two strobes requires two Fiber Optic Converters.
This converter attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to an Ikelite bulkhead in a housing.
Alternatives
There are two shooting scenarios where the High Sensitivity Optical Slave Converter # 4405 would be a better option:
- If you're shooting a DSLR or mirrorless camera with Nauticam fiber optic converter and want to shoot at a higher frame rate (4 FPS or faster).
- If your primary purpose is to trigger your strobes remotely at a distance from the housing without a fiber optic cable in between.
Ikelite Flex Arm Adapter 1/2-to-3/4 inch
$ 12.00
Ikelite Flex Arm Adapter 1/2-to-3/4 inch
Ikelite SKU: 0565.54 | Helix SKU: 056554
Overview
Use to transition between 1/2-inch and 3/4-inch flex arm components. Features male fitting on 1/2-inch end and female fitting on 3/4-inch end.
Ikelite Flex Light Arm For Action Tray
$ 39.95
Ikelite Flex Light Arm For Action Tray
Ikelite SKU: 4087.26 | Helix SKU: 408726
Overview
A lightweight and flexible arm for the Action Tray II for compact digital housings. The 8.5" (216mm) long flex arm accepts any light mount which is compatible with 1/2" Loc-line flex components, including the 1/2" flex mounts offered by Light & Motion. Mounting of strobes or larger video lights is not recommended. To mount a strobe, use the Flex DS51 Strobe Arm for Action Tray product # 4087.27 instead.
This arm can be attached to the top of a Quick Release Handle using the # 9573.31 mount.
Ikelite Flex Mount for Gamma
$ 19.95
Ikelite Flex Mount for Gamma
Ikelite SKU: 1882 | Helix SKU: 1882
Overview
Based on our popular flex arm system, this mount kit includes everything you need to attach your Gamma to a 1/2 in or 3/4 in flex arm. Gamma flashlight not included.
Ikelite Flex Strobe Arm For Action Tray
$ 39.95 - Sold Out
Ikelite Flex Strobe Arm For Action Tray
Ikelite SKU: 4087.27 | Helix SKU: 408767
Ikelite Flex Strobe Arm For Action Tray
$ 39.95
Ikelite Flex Strobe Arm For Action Tray
Ikelite SKU: 4087.27 | Helix SKU: 408727
Overview
A lightweight and flexible arm for the Action Tray for compact digital housings. The 10" (254mm) long flex arm accepts a DS50 or DS51 strobe. Mounting of larger strobes is not supported. To mount a video light, use product # 4087.26 instead.
This arm can be attached to the top of a Quick Release Handle using the # 9573.31 mount.
Ikelite Focus Gear for Canon EF 100mm IS USM Macro Lens
$ 65.00
Ikelite Focus Gear for Canon EF 100mm IS USM Macro Lens
Ikelite SKU: 5509.71 | Helix SKU: 550971
Overview
For use with DL port systems. Refer to the appropriate lens port chart for complete compatibility information.
What's Included
- Zoom sleeve
Ikelite Front Lens Cap for W-20 and W-30 Wide Angle Lenses
$ 14.95
Ikelite Front Lens Cap for W-20 and W-30 Wide Angle Lenses
Ikelite SKU: 0200.93 | Helix SKU: 020093
Overview
Protective cover for W-20 and W-30 lenses.
Ikelite GoPro Mount Kit for DSLR Housing
$ 94.95
Ikelite GoPro Mount Kit for DSLR Housing
Ikelite SKU: 2602.5 | Helix SKU: 26025
Overview
Mount your GoPro to any Ikelite DSLR housing featuring a central top mount.Â
What's Included
1" Ball Mount at DSLR Top Mount # 4081.6
1" Ball Clamp for Lightweight Accessories # 4081.21
1" Ball Mount for GoPro # 4081.73
Documentation
Ikelite Locking Stainless Steel Lid Snap
$ 19.95
Ikelite Locking Stainless Steel Lid Snap
Ikelite SKU: 0182 | Helix SKU: 0182
Overview
Replacement stainless steel lid snap with lock as used on Ikelite DSLR, compact digital, and video camcorder housings. Lid hook and mounting hardware not included.
Ikelite Neoprene Cover for 6-inch Dome, WD-4
$ 29.95
Ikelite Neoprene Cover for 6-inch Dome, WD-4
Ikelite SKU: 0200.1 | Helix SKU: 02001
Overview
Neoprene cover with drawstring to fit Standard 6-inch Dome Port and WD-4 Wide Angle Dome.
Ikelite Neoprene Cover for DSLR Flat Ports
$ 19.95
Ikelite Neoprene Cover for DSLR Flat Ports
Ikelite SKU: 0200.5 | Helix SKU: 02005
Overview
Neoprene cover with drawstring to fit DSLR Standard Flat Ports featuring a molded plastic front ring.
Ikelite Neoprene Front Cover for 8" Dome Ports
$ 49.95
Ikelite Neoprene Front Cover for 8" Dome Ports
Ikelite SKU: 0200.82 | Helix SKU: 020082
Overview
The new neoprene cover for the 8" dome has a stretch fit with super-soft lining to provide maximum protection for the most important part of your housing.
Two velcro strips on the back of the cover provide an attachment point for the optional Neoprene Rear Cover for 8" Dome Ports which protects the inside of the dome from dust and doubles as a carrying pouch for lubricant, spare o-rings, allen wrenches, and other small parts.
Ikelite Neoprene Rear Cover for 8" Dome Ports
$ 14.95
Ikelite Neoprene Rear Cover for 8" Dome Ports
Ikelite SKU: 0200.83 | Helix SKU: 020083
Overview
Two velcro strips attach this clever pouch to the back of the Neoprene Front Cover for 8" Dome Ports to protect the inside of the dome from dust. A durable plastic top zipper opens a compartment to store lubricant, spare o-rings, allen wrenches, and other small parts right where you need them.
SpecificationsÂ
Â
Â
Ikelite Nikon D810 Housing 200DL
$ 1,695.00
Ikelite Nikon D810 Housing 200DL
Ikelite SKU: 71009 | Helix SKU: 71009
Overview
A full featured and durable waterproof housing for Nikon D810Â DSLR cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.
Features
This popular model has been completely re-designed from the ground up to include all of our latest improvements.
Lens Ports
The single most important upgrade is our long awaited new Dry Lock (DL) port system. This exciting new system is even more robust and even easier to assembly than our time-tested Four Lock (FL) system. The new ports are lighter and more adaptable, and can accommodate extremely large diameter lenses with ease. If you're considering shooting professional quality lenses like the Nikon 14-24mm or Sigma 10-20mm HSM, then the DL system is essential.
Most popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the DL System Port Chart to choose the correct gear. Zoom gears sold separately.
Due to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed and replaced with old style Port Locks for FL Port System (Set of 4) # 5509.04 for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. The housing cannot be converted back and forth repeatedly. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges. There are significant advantages to upgrading your lens ports which you can read about here. If you're shooting an 8" diameter dome, you'll also save almost 2 pounds by using the DL version instead.
Vacuum System
The included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.
TTL Exposure
This housings supports your choice of shooting all manual or adding a TTL converter depending on your application. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL hotshoe or carry back up parts when traveling to remote locations.
You can still enjoy the fastest and most accurate TTL exposure on the market by adding the NT2 Nikon TTL Hotshoe # 46064, Nikon TTL Converter with Ikelite plug # 4301.3, and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.
Controls and Set-Up
We've upgraded the shutter and AF-ON levers to a more natural feeling curved design. Both controls can optionally be extended using the Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle. If you're not already using back button focus, we recommend learning this valuable trick.
Our push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off.
The camera mount is now front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
Viewfinders
The included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder # 6890 or 45° Magnified Viewfinder (Type 1) # 6891.1.
Handling & Travel
Overall the housing is over 1/2 pound lighter than its former FL counterpart (housing model # 6812.81). Our new hard anodized aluminum base with quick release handle has also been streamlined for travel and is over 3/4 pound lighter than our previous DSLR tray and handle system. The Right-Hand Quick Release Handle # 4077.02 (sold separately) can be added or removed depending on how you want to shoot. The precision machined aluminum base features 1/4-20 tripod mounting sockets and additional mounting locations for future accessories. Plus, the base and handle can be quickly removed when breaking down your system for travel.
A 1/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.
If you're shooting with two strobe or lighting arms, then a top handle can be added to make the system easier to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.
Construction
Our new white ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.
Like its predecessor and all of our housings, this product is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).
TTL Exposure
Install optional Nikon TTL Hotshoe Product #Â 46064 and connect the TTL Converter Product #Â 4301.3 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the TTL Hotshoe and Converter, but will not provide TTL exposure.
Non-Ikelite Strobes
SEA&SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.
Ikelite Non-Digital Strobes
Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.
Fiber Optic
Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.
Remote Triggering
Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).
Compatibility
This housing is only compatible with the Nikon D810Â DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
Specifications
200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all important camera controls; Controls are not provided for Release mode dial, Release mode dial lock release, Diopter adjustment control, Eyepiece shutter lever, Pv button, Fn button, Focus-mode selector, BKT button, Focus selector lock
1/4-20 thread base mounts with 3.5" spacing
Near neutral buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
4.9Â lb (2.2 kg)
9.1 x 7 x 6.5" (231 x 178Â x 165Â mm)
In the Box
Housing
Rear o-ring # 0132.61
Front o-ring # 0132.45
Base with Left-Hand Quick Release Handle # 4077.67
Port Hole Cover # 0200.92
Zoom Gear Retainer # 75900
Tool for Zoom Gear Retainer # 0945.06
Waterproof Bulkhead Cap # 9104.5
1/16" Hex Key # 0945.16
1/8" Hex Key # 0945.18
Control + Push Button Tip Assortment # 9249
Silicone Lubricant 2cc Tube # 0184.2
Â
Ikelite O-Ring 0105 for FL System DSLR Lens Port
$ 12.95
Ikelite O-Ring 0105 for FL System DSLR Lens Port
Ikelite SKU: 0105 | Helix SKU: 0105
Overview
Replacement seal for DSLR Housings with the FL (Four Lock) port system. This o-ring fits between the housing and the lens port. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Not for use between the Lens Extension and Modular 8-inch Dome or Flat Front. Not for use with housings featuring DL or DLM port systems.Â
Ikelite O-Ring 0109 for Digital Housings
$ 8.95
Ikelite O-Ring 0109 for Digital Housings
Ikelite SKU: 0109 | Helix SKU: 0109
Overview
Replacement seal for certain Ikelite housings for compact digital cameras. Refer to your housing's instruction manual for compatibility.
Newer o-rings are red-orange in color. They can be used interchangeably with the black o-rings as long as you select the correct size for your housing.
Ikelite O-Ring 0110 for Digital Housings
$ 19.95
Ikelite O-Ring 0110 for Digital Housings
Ikelite SKU: 0110 | Helix SKU: 0110
Overview
Replacement seal for certain Ikelite housings for compact digital and mirrorless cameras. Refer to your housing's instruction manual for compatibility.
Ikelite O-Ring 0123 for RCD, Super-8 Lights
$ 9.95
Ikelite O-Ring 0123 for RCD, Super-8 Lights
Ikelite SKU: 0123 | Helix SKU: 0123
Overview
Replacement seal for RCD and Super-8 flashlights.
Ikelite O-Ring 0124 for C-Light 8
$ 9.95
Ikelite O-Ring 0124 for C-Light 8
Ikelite SKU: 0124 | Helix SKU: 0124
Overview
Replacement seal for C-Light 8 Halogen or LEDÂ flashlights.
Ikelite O-Ring 0126 for Mini-C Light
$ 9.95
Ikelite O-Ring 0126 for Mini-C Light
Ikelite SKU: 0126 | Helix SKU: 0126
Overview
Ikelite O-Ring 0126 for Mini-C Light
Ikelite O-Ring 0132.41 for FL Modular Port Extension
$ 14.95
Ikelite O-Ring 0132.41 for FL Modular Port Extension
Ikelite SKU: 0132.41 | Helix SKU: 013241
Overview
Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring 0132.45 for DL Port System, ULTRAcompact Housings
$ 14.95
Ikelite O-Ring 0132.45 for DL Port System, ULTRAcompact Housings
Ikelite SKU: 0132.45 | Helix SKU: 013245
Overview
Compatible with:
- DL Port System
- ULTRAcompact Housings
- Compact Video Housings
Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring 0132.59 for DSLR & Mirrorless Housings (Type 1)
$ 17.95
Ikelite O-Ring 0132.59 for DSLR & Mirrorless Housings (Type 1)
Ikelite SKU: 0132.59 | Helix SKU: 013259
Overview
For select DSLR & Mirrorless housing models. Refer to your housing documentation for compatibility. Lubrication is not required but Ikelite silicone lubricant may be used if needed to clean the o-ring.
Ikelite O-Ring 0132.61 for DSLR & Mirrorless Housings (Type 2)
$ 17.95
Ikelite O-Ring 0132.61 for DSLR & Mirrorless Housings (Type 2)
Ikelite SKU: 0132.61 | Helix SKU: 013261
Overview
For select DSLR & Mirrorless housing models. Refer to your housing documentation for compatibility. Lubrication is not required but Ikelite silicone lubricant may be used if needed to clean the o-ring.
Ikelite O-Ring for PC-Series Flashlight - PC / PCa (4 C cell / 6 AA cell)
$ 9.95
Ikelite O-Ring for PC-Series Flashlight - PC / PCa (4 C cell / 6 AA cell)
Ikelite SKU: 0134.28 | Helix SKU: 013428
Overview
Replacement seal for PC-series Halogen or LED light front. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring for PC-Series Flashlight - PCm (4 AA cell)
$ 9.95
Ikelite O-Ring for PC-Series Flashlight - PCm (4 AA cell)
Ikelite SKU: 0134.23 | Helix SKU:Â 013423
Overview
Replacement seal for PC-series Halogen or LED light front. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Â
Ikelite O-Ring for Sync Cord Plug - Ikelite ICS-5 Plug
$ 9.95
Ikelite O-Ring for Sync Cord Plug - Ikelite ICS-5 Plug
Ikelite SKU: 0136.13 | Helix SKU:Â 013613
Overview
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring for Sync Cord Plug - Nikonos SB Strobe
$ 9.95
Ikelite O-Ring for Sync Cord Plug - Nikonos SB Strobe
Ikelite SKU:Â 0117 | Helix SKU:Â 0117
Overview
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring for Sync Cord Plug - Nikonos V / N5 Plug
$ 9.95
Ikelite O-Ring for Sync Cord Plug - Nikonos V / N5 Plug
Ikelite SKU:Â 0118 | Helix SKU:Â 0118
Overview
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring for Sync Cord Plug - SEA&SEA / INON Strobe
$ 9.95
Ikelite O-Ring for Sync Cord Plug - SEA&SEA / INON Strobe
Ikelite SKU: 0134.12 | Helix SKU: 013412
Overview
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Rings for 1 Inch Ball Arm (Set of 10)
$ 8.00 - Sold Out
Ikelite O-Rings for 1 Inch Ball Arm (Set of 10)
Ikelite SKU: 4081.01 | Helix SKU: 408101
Overview
Use to replace worn or broken o-rings on most Ikelite and non-Ikelite 1-inch ball arms. Replace the o-rings on your ball arm components occasionally for maximum grip and low-tension holding power.
Ikelite Port Hole Cover for DL Dry Lock Housings
$ 17.95
Ikelite Port Hole Cover for DL Dry Lock Housings
Ikelite SKU: 0200.92 | Helix SKU: 020092
Overview
Removable dust cover for Dry Lock (DL) housings.
Ikelite Port Hole Cover for FL DSLR Housings
$ 14.95
Ikelite Port Hole Cover for FL DSLR Housings
Ikelite SKU: 0200.91 | Helix SKU: 020091
Overview
Removable dust cover for Four Lock (FL) housings.
Ikelite Port Locks for FL Port System (Set of 4)
$ 29.95
Ikelite Port Locks for FL Port System (Set of 4)
Ikelite SKU: 5509.04 | Helix SKU: 550904
Overview
Set of four port locks. Used to convert a housing with the Dry Lock (DL) port system to accept legacy lens ports designed for the Four Lock (FL) port system.
Ikelite PT1K Panasonic TTL Kit with Hotshoe
$ 374.95
Ikelite PT1K Panasonic TTL Kit with Hotshoe
Ikelite SKU: 46031 | Helix SKU: 46031
Overview
- 200DL Housing for Panasonic Lumix GH5, GH5S # 71305
- 200DL Housing for Panasonic Lumix DC-G9 # 71307
Not compatible with any other models except as listed above
Not compatible with non-Ikelite housings
Ikelite Rear Lens Cap for W-20 Wide Angle Lens
$ 14.95
Ikelite Rear Lens Cap for W-20 Wide Angle Lens
Ikelite SKU: 0200.94 | Helix SKU: 020094
Overview
Protective cover for the W-20 lens. Cannot be used with the W-30 lens.
Ikelite Rear Lens Cap for W-30 Wide Angle Lens
$ 14.95
Ikelite Rear Lens Cap for W-30 Wide Angle Lens
Ikelite SKU: 0200.95 | Helix SKU: 020095
Overview
Protective cap for W-30 lens. Cannot be used with the W-20 lens.
Ikelite Red Filter M27 for Gamma
$ 19.95
Ikelite Red Filter M27 for Gamma
Ikelite SKU: 1871 | Helix SKU: 1871
Overview
Red light maintains your night vision, and helps in observing underwater life without scaring it off. Threads onto the front of the Gamma flashlight and other lights with M27 (27mm) thread. The filter can be removed and replaced underwater. Includes diffuser and lanyard.
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - AU
$ 29.95
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - AU
Ikelite SKU: 0083.95 | Helix SKU: 008395
Overview
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - EU
$ 45.00
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - EU
Ikelite SKU: 0083.93 | Helix SKU: 008393
Overview
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - UK
$ 45.00
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - UK
Ikelite SKU: 0083.94 | Helix SKU: 008394
Overview
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
Ikelite ST1K Sony Alpha TTL Kit with Hotshoe
$ 374.95
Ikelite ST1K Sony Alpha TTL Kit with Hotshoe
Ikelite SKU: 46040 | Helix SKU: 46040
Overview
Housing Compatibility
- # 71472 / 200DL Housing for Sony Alpha A7 II, A7R II, A7R II
- # 71473 / 200DL Housing for Sony Alpha A7 III, A7R III, A9
Not compatible with any other models except as listed above
Not compatible with non-Ikelite housings
Strobe Compatibility
- Ikelite DS50 above serial # 70000
- Ikelite DS51
- Ikelite DS125 above serial # 5000
- Ikelite DS160, DS161
- Ikelite DS200 above serial # 7163
Ikelite Strap Wrench to Remove Ports
$ 10.00
Ikelite Strap Wrench to Remove Ports
Ikelite SKU: 0945.01 | Helix SKU: 094501
Overview
Multi-use rubber strap wrench. Perfect for disassembly of the Modular Port System, or removing ports from compact digital housings.
This product is not made by Ikelite. Actual product style and specifications subject to change.
Ikelite Substrobe AQ/S For Aquashot 3
$ 150.00
Ikelite Substrobe AQ/S For Aquashot 3
Ikelite SKU: 5438.3 | Helix SKU: 54383
Overview
CAMERA FLASH
-
Type
underwater flash
POWER
-
Power Consumption
Recycling time - 5 sec / 200 flash: - with 4 x AA type - alkaline
-
Required Battery
4 x battery - AA type
-
Battery Technology
Alkaline
BATTERY
-
Required Qty
4
-
Form Factor
AA type
-
Technology
alkaline
-
Type
standard battery
HEADER
-
Brand
Ikelite
-
Product Line
Ikelite SubStrobe
-
Model
AQ/S
-
Localization
English
-
Packaged Quantity
1
CAMERA FLASH DETAILS
-
Recycling Time
5 sec
-
Max Number of Flashes
200
-
Battery Form Factor
AA type
-
Battery Technology
alkaline
-
Required Qty
4
DIMENSIONS & WEIGHT
-
Weight
1.32 lbs
GENERAL
-
Manufacturer
Ikelite Underwater Systems
