Benro Adventure AL Series 2 3-Section Aluminum Tripod with Flip Locks TAD27A
$ 134.95
Benro Adventure AL Series 2 3-Section Aluminum Tripod with Flip Locks TAD27A
Benro SKU: TAD27A | Helix SKU: IDTAD27A
Overview
This classic design tripod, the Adventure TAD27A, offers advanced features and controls for exploring every style of photography. The Adventure tripod combines aluminum legs with lightweight magnesium castings and quick flip leg locks for ease of use.
Specifications
| MAXIMUM LOAD | 26.5 lb (12 kg) |
| MAX HEIGHT (24° LEG ANGLE) W/COLUMN EXTENDED | 63.8 in (162 cm) |
| MAX HEIGHT (24° LEG ANGLE) W/COLUMN RETRACTED | 53.15 in (135 cm) |
| MINIMUM HEIGHT | 15.16 in (38.5 cm) |
| MAXIMUM HEIGHT | 63.8 in (162 cm) |
| FOLDED LENGTH | 24.2 in (61.5 cm) |
| NUMBER OF LEG SECTIONS | 3 |
| LEG LOCK TYPE | Flip Lock |
| WEIGHT | 3.95 lb (1.79 kg) |
| LEG DIAMETER 1 | 28.6 mm |
| LEG DIAMETER 2 | 25.2 mm |
| LEG DIAMETER 3 | 21.8 mm |
Item Includes
Benro Mach3 AL Series 2 Aluminum Tripod
$ 174.95 - Sold Out
Benro Mach3 AL Series 2 Aluminum Tripod
Benro SKU: TMA28A | Helix SKU: IDTMA28A
Overview
Support up to 30.9 lb worth of gear with the TMA28A Series 2 Mach3 Aluminum Tripod from Benro. Made from aluminum, the 4-section legs are secured via twist locks and extend to a maximum height of 61.2". The center column can be replaced with the included short column to allow the tripod to reach a minimum height of 12.4". One of the legs unscrews from the tripod, attaches to the center column, and with the addition of an optional head converts to a monopod. The rubber feet can be swapped out for metal spikes so that the tripod can be used on hard surfaces, such as ice, or soft surfaces, like carpeting or a lawn. A ballast hook on the center column allows for the addition of stabilizing weight, and the included carrying case protects the tripod during transport. A 3/8"-16 threaded stud on the mounting platform lets you attach a head of your choice.
Benro TSL08CN00 Slim Carbon-Fiber Tripod with Ball Head
$ 154.95
Benro TSL08CN00 Slim Carbon-Fiber Tripod with Ball Head
This TSL08CN00 Slim Tripod from Benro is constructed from carbon fiber to minimize weight, supports up to 8.8 lb, and includes an Arca-type ball head with quick release plate. Designed to conserve space during storage and transport, the tripod measures 20.1" long and 3.2" wide when folded. Its 4-section legs each feature an independent spread, a 3-position angle lock, half-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 15.7" to a maximum height of 48.4" or 57.6" with its push-and-pull, rapid center column fully raised.
Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate. The quick release plate can be attached or removed from the integrated, Arca-type clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. While the top of the quick release plate features a rubberized, non-slip platform, dual retaining screws are provided along its underside. Those retaining screws help prevent the quick release plate and an attached camera from accidentally sliding off when the clamp it is placed on is opened.
By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Additionally, the primary locking knob controls the ability to pan the head 360°. For added versatility, the tripod's center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them.
Gitzo GT2542 Mountaineer Series 2 Carbon Fiber Tripod
$ 1,212.95
Gitzo GT2542 Mountaineer Series 2 Carbon Fiber Tripod
Gitzo SKU: GT2542 | Helix SKU: GZGT2542
Overview
The Gitzo GT2542 series 2 Carbon Fiber Tripod is a lightweight 4-section tripod that reliably supports DSLRs with 200mm lenses (up to 300mm). This professional solution features Carbon eXact tubing with stiffer and larger leg diameters with a top leg section diameter of 29.0mm and high modulus carbon fiber lower leg sections, which make this tripod more rigid and stronger than others in its category.
The Gitzo GT2542 weighs just 1.68 kg, reaches a height of 167 cm and folds down to 56 cm. This tripod is the perfect choice for passionate and professional photographers who want extremely resistant, reliable support for impeccable photography results.
The tripod’s rapid center column is easily removed, transforming it into a ground level set enabling photographers to capture the broadest range of perspectives. It also has a reversible column mechanism.
The Gitzo GT2542 four-section legs are secured by G-lock Ultra twist locks, with a built-in O-ring that keeps dirt and dust out of the leg mechanism. The tripod’s top spider is newly designed for extra rigidity, and large leg angle selectors provide broader grip-area for leg-angle adjustment. The tripod features a stabilizer hook on its center column to add weight and increase stability when required. Its removable feet enable it to change and adapt to any type of surface. A wide array of heads and other accessories can easily be added via the 1/4″ and 3/8″ attachment on the upper disc.
Specifications
| Weight | 59.25 oz |
|---|---|
| Material | Carbon Fiber |
| Safety Payload Weight | 39.68 lbs |
| Legs Tube Diameter | 0.72- 0.85- 1- 1.14 in |
| Leg Sections | 4 |
| Leg Angles | 23°, 55°, 83° |
| Top Attachment | 1/4″ screw, 3/8″ screw |
| Min Height | 5.91 in |
| Maximum Height | 65.75 in |
| Maximum Height (with Center Column Down) | 54.72 in |
| Closed Length | 22.05 in |
| Upper Disc Diameter | 2.36 in |
| Carrying Bag Included | NONE |
| Center Column | rapid |
| Color | Noir Decor |
| Easy Link | No |
| Leg Type | Single |
| Leg Lock Type | Twist Lock |
| Maximum Working Temperature | 158 F |
| Minimum Working Temperature | -22 F |
Manfrotto 055 Carbon Fiber 3-Section Tripod w/Column
$ 597.99 - Sold Out
Manfrotto 055 Carbon Fiber 3-Section Tripod w/Column
Manfrotto SKU: MT055CXPRO3 | Helix SKU: BOMT055CXPRO3
Overview
Shoot more accurately than ever before. The new 055 carbon fibre-3 section photo tripod offers outstanding rigidity and is incredibly lightweight. This engineering masterpiece from Italy has been manufactured to very high standards, and features a 90° column that can be extended vertically or horizontally so you can shoot with greater versatility.
With 100% carbon fibre tubes and an innovative Quick Power Lock (QPL) leg-locking mechanism, you can be assured incredible stability and rigidity under any conditions. This tripod not only absorbs vibrations, it's also much lighter to carry around than the aluminium version. That mean it is a very good choice for travel photographers.
Don't worry about disassembling your camera, because you can extend the column without your equipment attached. Open it single-handedly in only one movement, and position each leg to a pre-set angle so you can frame and shoot more precisely. The 055 carbon fibre-3 section has an innovative bubble level that rotates freely around the centre column, enabling you to position your camera so that nothing obscures it. Connect an LED light, flash, reflector or another video accessory via the Easy Link connector, which can be fitted to an extending arm or bracket. Make your tripod a versatile, practical mobile studio.
Specifications
Manfrotto 290 Xtra 3 Section Aluminum Tripod
$ 164.99 - Sold Out
Manfrotto 290 Xtra 3 Section Aluminum Tripod
Manfrotto SKU: MT290XTA3US | Helix SKU: BOMT290XTA3US
Overview
- 4 leg angles positions
- Rock solid aluminum adjustable leg locks
- New rubber legwarmer to increase the grip
- Updated metal disc with the Manfrotto logo
- Special shoulder bag to maximize transportability
The new 290 Xtra is the perfect solution in terms of stability for hobbyist photographers.
The 290 Xtra is a three-section tripod, the biggest in the 290 range, with aluminum leg tubes and special top casting enhancing rigidity, durability and performance. Its aluminum leg-locking levers are tension-adjustable, so they can be tightened to counteract any effects of aging and wear, keeping the tripod fully functional throughout its long lifespan. This tripod’s key feature is its choice of four leg angle positions which maximize shooting creativity. Its rapid centre column adds flexibility and extends the min-max height range. A new rubber legwarmer guarantees comfortable grip and maximum ergonomics. The tripod comes with a dedicated shoulder bag ensuring comfortable portability at all times.
Specifications
| Weight | 62.78 oz |
|---|---|
| Collection/Series | 290 |
| Material | Aluminum |
| Safety Payload Weight | 11.02 lbs |
| Legs Tube Diameter | 1.02- 0.89- 0.75 in |
| Leg Sections | 3 |
| Leg Angles | 25°,46°,66°,88° |
| Top Attachment | 3/8″ screw |
| Min Height | 12.01 in |
| Maximum Height | 63.19 in |
| Maximum Height (with Center Column Down) | 53.94 in |
| Closed Length | 23.43 in |
| Upper Disc Diameter | 2.36 in |
| Carrying Bag Included | 109711 |
| Center Column | rapid |
| Color | Black |
| Easy Link | No |
| Leg Type | Single |
| Leg Lock Type | Flip Lock |
| Maximum Working Temperature | 140 F |
| Minimum Working Temperature | -22 F |
ProMediaGear TR343 34mm Series 51" Pro-Stix Carbon-Fiber Tripod with Top Plate
$ 1,059.95 - Sold Out
ProMediaGear TR343 34mm Series 51" Pro-Stix Carbon-Fiber Tripod with Top Plate
ProMediaGear SKU: TR343 | Helix SKU: PMGTR343
Overview
The Pro-Stix Carbon Fiber Series Tripods are designed and built for the professional videographer or photographer looking for the toughest and most rugged tripod. The tripods are rated to support loads up to 60 lbs. The apex features an interchangeable flat plate that can be removed and transitioned to various accessories such as our #TRB3475 75mm Leveling Bowl insert. The apex plate has a 3/8-16 standard mounting thread for Ball Heads, Video Heads, Gimbals, Sliders and much more.
The carbon fiber legs have 3 adjustable locking angle positions to accommodate any shooting situation, high to low. Each side of the apex features a 1/4-20 threaded adapter port to mount additional accessories. One of the adapter ports comes complete with a large and easy to read spirit level. Lastly, each tripod foot has a hardened stainless-steel spike integrated inside the tube. The entire line-up of ProMediaGear Pro-Stix Carbon Fiber Tripods are precision CNC machined in our factory located in Tinley Park, IL USA.
Specifications
Item Includes
Studio-Assets Deluxe Heavy Duty Tripod with Geared Column
$ 299.95 - Sold Out
Studio-Assets Deluxe Heavy Duty Tripod with Geared Column
Studio-Assets SKU: SA1488 | Helix SKU: SA1488
Overview
This heavy-duty professional tripod provides solid camera support for all camera formats up to 4 x 5". The tripod features three-section legs with convenient quick-release leg locks for quick setups. The adjustable center-brace allows symmetric or asymmetric positioning of the legs. At the end of the legs are retractable rubber/spiked feet to provide stable footing on a variety of different surfaces.
The center column can be positioned by the crank handle to fine-tune the height of the tripod. On top of the column is a 3/8" mount that will accommodate a wide range of different tripod heads. The bubble level near the center column will help with leveling the tripod on uneven terrain.
Specifications
| SKU | SA1488 |
|---|---|
| UPC | 853434006533 |
| PRODUCT WEIGHT | 9.6 lb |
| PACKAGE CONTENTS |
(1x) Deluxe Tripod |
| CAMERA COMPATIBILITY | Up to 4 x 5" |
| FOLDED LENGTH | 32" |
| LEG ANGLES | Multiple |
| LEG LOCK TYPE | Flip |
| LEG SECTIONS | 3 |
| LEVELLING BUBBLE | Yes |
| MATERIAL | Aircraft Grade Aluminum |
| MAXIMUM LOAD | 26 lb |
| MINIMUM HEIGHT | 16.5" |
| MAX HEIGHT WITH CENTER COLUMN COLLAPSED | 66" |
| MAX HEIGHT WITH CENTER COLUMN EXTENDED | 74.75" |
| QUICK RELEASE PLATE | none |
| TRIPOD HEAD MOUNT | 3/8"-16 |
Studio-Assets Video Tripod with Mid-level Spreader
$ 185.95
Studio-Assets Video Tripod with Mid-level Spreader
Studio-Assets SKU: SA1520 | Helix SKU: SA1520
Overview
With its mid-level spreader and twin legs with secure leg locks, this video tripod will provide stable support when filming. The tripod has a maximum height of 51.3" (130.3 cm), a minimum height of 22" (56 cm), and weighs just 5.4 lb (2.4 kg). The 75mm bowl allows a variety of professional heads to be mounted to the tripod.
Specifications
Back