Kupo 10In Suction Cup With Cheese Plate And 1-1/2In (48Mm) Starter
$ 353.95
Kupo 10In Suction Cup With Cheese Plate And 1-1/2In (48Mm) Starter
Mfr SKU:Â KG086911 Â Â | Helix SKU: KUKG086911Â Â
Overview:
Primarily designed to mount cameras and lighting equipment to cars, this suction cup is 10in in size with a round cheese plate with multiple 3/8in mounting holes and two 1-1/2in starters. Includes two 1-1/2in starters 3-1/2in (9cm) long, which allows fitting to 1-1/2in (48.3mm) speed-rail systems. Supplied with pad protector.Â
Â
Â
Features:
- Designed for mounting cameras and lighting equipments to cars
- 10in suction cup with standard 3/8in holes, round cheese plate and two 1-1/2in starters
- Features two 1-1/2in starters, 3.5in (9cm) long, which allows it to fit 1-1/2in Speed-Rail systems
- The suction cup can be used at temperatures from 10.4 to 120.2°F (-12 to 49°C)
- Red indicator on the suction cup warns of any vacuum loss
Â
Â
Â
Â
Â
Specifications:
Â
- Color:Â Black and Silver
- Material - Primary:Â Aluminum
- Material - Secondary:Â Rubber
- Material - Tertiary:Â Silicon
- Product Height:Â 5.79in / 14.7cm
- Product Length:Â 12.76in / 32.4cm
- Product Width:Â 9.06in / 23.0cm
- Product Weight:Â 7.49lb / 3.4kg
- Stand Adapter Type:Â 1-1/2in Starter and Industry Standard 3/8in Mounting Holes
- Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Kupo 6" Suction Cup With Swivel Coupler For 2" Pipe
$ 265.95
Kupo 6" Suction Cup With Swivel Coupler For 2" Pipe
Mfr SKU:Â KG079512 Â Â | Helix SKU:Â KUKG079512 Â Â
Overview:
Â
Â
Features:
- Can support up to 44lbs (20kg). 6" suction cup comes with a swivel coupler for 2" tube primary designed for vehicle rigging and offers a temporary mounting solution on a car
- The suction cup can be used at temperatures from -12 degree to 49 degrees
- Red indicator on the suction cup warns of any vacuum loss
- Features a steel ball
- The T handle on the coupler allows to tighten easily and coneniently
Â
Â
Â
Â
Â
Specifications:
- Color:Â Black and Silver
- Material - Primary:Â Aluminum
- Material - Secondary:Â Rubber
- Material - Tertiary:Â Silicon
- Product Height:Â 4.92in / 12.5cm
- Product Length:Â 6.5in / 16.5cm
- Product Width:Â 5.51in / 14.0cm
- Product Weight:Â 3.5lb / 1.59kg
- Maximum Payload Capacity:Â 44.05lb / 20.0kg
- Maximum Jaw Diameter:Â 2.01in / 51.0mm
- Minimum Jaw Diameter:Â 1.89in / 48.0mm
- Stand Adapter Type:Â 2in Coupler
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Kupo Arri 3/8In Locating Pin To Arri Rossette (M6) Adapter
$ 65.95
Kupo Arri 3/8In Locating Pin To Arri Rossette (M6) Adapter
Mfr SKU:Â KG035811 Â Â | Helix SKU:Â KUKG035811 Â Â
Overview
Â
Â
Features
- Designed for attaching to a camera cage, rosette handle and any other ARRI standard Rosette fitting
- Kupo Arri Rosette is 31.8mm in diameter with 60 teeth
- Prevents equipment rotation with the Arri locating pin
- The M6 internal female thread is designed for mounting Arri standard Rosette-style accessories and allows 360 degree rotation
- Made of stainless steel and aluminum
Â
Â
Â
Â
Â
Specifications
- Color:Â Black
- Material - Primary:Â Stainless Steel
- Material - Secondary:Â Aluminum
- Product Height:Â 1.22in / 3.1cm
- Product Length:Â 1.42in / 3.6cm
- Product Width:Â 1.22in / 3.1cm
- Product Weight:Â 7.05lb / 3.2kg
- Stand Adapter Type:Â Arri 3/8in-16 Locating Pin to Arri Rosette (M6)
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Kupo Arri Monitor Bracket For Wcu-4
$ 55.95
Kupo Arri Monitor Bracket For Wcu-4
Kupo SKU: KG079011   | Helix SKU: KUKG079011  Â
Overview
This monitor bracket is compatible with the ARRI WCU-4 Wireless Compact Unit. Designed for easily mounting to the top or bottom of the WCU-4 with two bolts (included) and attaches to on-board monitors with any accessory. Comes with a 1/4in-20 male thread. The 18 degree tilt helps for viewing the monitor with ease and convenience. Ideal also for using with Kupo’s Vision Lock Quick-Release Mounting Set (KG046212) that makes it fast and easy to disconnect the monitor from the bracket when needed. In addition, the Kupo 3.5in Long 5/8in Baby Stud with 1/4in-20 Male (KG012412) connects a gobo head and this bracket.Â
Â
Â
Features
- Designed for mounting the on-board monitor, which comes with 1/4-20 male threaded, on WCU-4 by two bolts
- Compatible with ARRI WCU-4 Wireless Compact Unit
- The 18 degree tilt helps to conveniently view the monitor
- WCU-4 can be mounted on the stand through a grip head by attaching a 16mm baby pin with 1/4in-20 thread
- Ideal for using with Kupo’s Vision Lock Quick-Release Mounting Set (KG046212) to attach or disconnect the monitor from the bracket when needed.
Â
Â
Â
Â
Â
Specifications
- Color:Â Black
- Material - Primary:Â Aluminum
- Material - Secondary:Â Steel
- Product Height:Â 0.47in / 1.2cm
- Product Length:Â 4.84in / 12.3cm
- Product Width:Â 3.86in / 9.8cm
- Product Weight:Â 1.21lb / 0.55kg
- Stand Adapter Type:Â 1/4in-20
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Kupo Arri Wcu-4 Monitor Mount And Docking Bracket
$ 195.95
Kupo Arri Wcu-4 Monitor Mount And Docking Bracket
Mfr SKU:Â KG079211 Â Â | Helix SKU:Â KUKG079211 Â Â
Overview
 The Kupo ARRI WCU-4 Monitor-Bracket with handgrip allows you to place your monitor as close to the index mark of the focus knob as possible. Features include an ergonomically designed handgrip that transfers weight efficiently from the wrist to the biceps. An additional 5/8in (16mm) baby receiver is on the bottom of the handgrip to allow it to serve as a docking bracket for a c-stand. The monitor bracket also allows you to attach an on-board monitor with any equipment that comes with 1/4in-20 male thread. Ideal for using with Kupo’s Vision Lock Quick-Release Mounting Set (KG046212) that makes it fast and easy to disconnect the monitor from the bracket when needed.
Â
Â
Features
- Handgrip enables you to place the monitor as close to the index mark of the focus knob as possible
- Features an ergonomically designed handgrip that efficiently transfers the weight from the wrist to the biceps
- Additional 16mm baby receiver is designed on the bottom of handgrip which allows it to serve as a docking bracket for a C stand
- The monitor bracket also allows you to attach an on-board montior with any equipment that comes with 1/4in-20 male thread
- Ideal for using with Kupo’s Vision Lock Quick-Release Mounting Set (KG046212) to attach or disconnect the monitor from the bracket when needed.
Â
Â
Â
Â
Â
Specifications
- Color:Â Black
- Material - Primary:Â Aluminum
- Product Height:Â 0.87in / 2.2cm
- Product Length:Â 2.09in / 5.3cm
- Product Width:Â 1.5in / 3.8cm
- Product Weight:Â 1.1lb / 0.5kg
- Stand Adapter Type:Â For Arri Focus Puller (WCU-4)
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Kupo Assistant'S Front Box Mount For A Fluid Head
$ 267.95
Kupo Assistant'S Front Box Mount For A Fluid Head
Kupo SKU:Â KG047611 Â Â | Helix SKU:Â KUKG047611 Â Â
Overview
Â
Â
Features
- Built for easily mounting the Kupo Front Box to a Fluid Head or other equipment
- Two twist-locking pins for firmly attaching to the Fluid Head by simply sliding round hanging pins into the groove of front box bracket to keep the box in place
- Twist locking pin is knurled, which makes it easy to tighen securely
- Feature a unique spring locking pin that keeps the Front Box secure
- Aluminum plate with a black anodized finish
Â
Â
Â
Â
Â
Specifications
Â
- Color:Â Black
- Material - Primary:Â Aluminum
- Product Height:Â 1.38in / 3.5cm
- Product Length:Â 1.77in / 4.5cm
- Product Width:Â 7.68in / 19.5cm
- Product Weight:Â 0.48lb / 0.22kg
- Stand Adapter Type:Â For Fluid Head
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Manfrotto 237HD Heavy-Duty Flex Arm for Super Clamp (Black)
$ 47.99 - Sold Out
This Flexible arm gives infinite positioning and is designed to work in conjunction with the SuperClamp system. Attachment: 16mm.; attachment 2: type 18; color: black; diameter: 0.71 in.; length: 21.65 in.; load capacity: 1.10 lbs.; material: brass material; weight: 1.57 lbs.
Manfrotto 244 Variable Friction Magic Arm with Camera Bracket - Replaces 2929
$ 151.99 - Sold Out
This Manfrotto Variable Friction Magic Arm with Camera Bracket features a large center locking knob. Variable friction and locking of arm obtained by adjusting knob. Comes complete with Camera/Umbrella Bracket 143BKT only. This replaces the Manfrotto 2929. Arm length: 20.87 in.; arm tube diameters: 20mm.; attachment: type 17; attachment 2: type 17.; color: black; load capacity: 6.61 lbs.; material: aluminum; weight: 2.40 lbs.
Manfrotto 244N Variable Friction Magic Arm without Camera Bracket (Black)
$ 134.99 - Sold Out
Articulated arms are a great accessory for any studio application.. Features as 143N, but a large locking knob takes the place of the cam-lever. Variable friction and locking of arm obtained by adjusting knob. Arm tube diameters: 20mm.; attachment: type 17; attachment 2: type 17; black color; load capacity: 6.61 lbs. material: aluminum; weight: 2.40 lbs.
Manfrotto 296 Photo Clamp with 3/8-Inch Tip - Replaces 3287
$ 36.00
This Manfrotto Photo Clamp can be fixed to surfaces up to 60mm thick. Has 2 x 3/8" male threads for mounting ball head and camera. This replaces the Manfrotto 3287. Attachment: 3/8'' screw; clamp range - max (rectangular tube): 2.36 in.; color: black; diameter: 1.97 in.; material: aluminum; weight: 0.31 lbs.
Manfrotto 2965 Heavy Duty Swiveling C Clamp
$ 128.99 - Sold Out
Adjustable jaw from 28 to 78mm. 360° locking swivel. Rotating mounting attachment. Max load on 1 1/8" attachment: 75 kg Max load on 5/8" attachment: 10 kg.
Right Angle Baby Plate
$ 24.95
This wall plate contains a 5/8" baby stud bent at a 90 degree angle, with eight mounting holes for screws or nails.
Studio-Assets Heavy Duty Flex Arm for Super Clamp
$ 26.95 - Sold Out
This heavy-duty flexible arm has a 0.7" diameter and can hold up to 2 pounds (0.9 kg). The length is 21.75" long and features a brass 5/8" stud with a 1/4"-20 male thread on one end and a brass stud with 3/8"-16 female thread on the opposite end.
Highlights No
Package Contents
(1x) Heavy Duty Flex Arm
Outside Dimensions No
Inside Dimensions No
Product Weight (lb) 1.45 lb (0.7 kg)
Material Aluminum, Brass, Steel
Manufacturer Studio Assets
Studio-Assets Rapid Adapter - 5/8" Stud to 1/4"-20 Thread
$ 9.95
Rapid Adapter - 5/8" Stud to 1/4"-20 Thread
The Rapid Adapter converts a 5/8" Stud to a 17mm Long 1/4"- 20 thread. The adapter can be mounted horizontally or vertically onto the 5/8" stud. Included is locking nut for the 1/4" thread.
Highlights
› Can be mounted horizontally or vertically onto a 5/8" stud
› Includes locking nut for 1/4" thread
Package Contents
(1x) Rapid Adapter - 5/8" Stud to 1/4"-20 Thread
Outside Dimensions N/A
Inside Dimensions N/A
Product Weight (lb) 0.25 lb (0.1 kg)
Material Aluminum Alloy
Manufacturer Studio Assets
Studio-Assets Rapid Adapter - 5/8" Stud to 3/8"-16 Thread
$ 9.95 - Sold Out
The Rapid Adapter converts a 5/8" Stud to a 3/8"-16 thread. The adapter can be mounted horizontally or vertically onto a 5/8" stud. Included is locking nut for the 3/8" thread.
Studio-Assets Umbrella Adapter with Universal Cold Shoe
$ 24.95
The Umbrella Adapter with Universal Cold Shoe enables photographers to use any shoe-mounted light with an umbrella. Its swivel joint can tilt the light and umbrella up to 180 degrees. The adapter will fit onto any light stand with a standard 5/8" mount. Included is a double-ended stud that allows the adapter to be mounted to stands or clamps with a 1/4"-20 and 3/8"-16 thread.
