Benro A38FD 4-Section Monopod with 3-Leg Locking Base
$ 87.95 - Sold Out
Benro A38FD 4-Section Monopod with 3-Leg Locking Base
Benro SKU: A38FD | Helix SKU: IDA38FD
Overview
The A38 Video Monopod features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. This lightweight video monopod, available in both flip lock and twist lock, provides a 39.7 lb. payload capacity. Each Benro Video Monopod is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
ProMaster Air Support Monopod AS425
$ 99.95 - Sold Out
ProMaster Air Support Monopod AS425
ProMaster SKU: 5121 | Helix SKU: PR51211
Overview
Lightning-fast height adjustment without the need for traditional leg locks.
ProMaster's Air Support Monopod is lightning fast to deploy and adjust. Just pull to extend it or squeeze two buttons to retract it. Unlike a traditional monopod, the ProMaster Air Support requires no leg locks. Its unique air pressure system saves time and even allows you to fine-tune the height while shooting!
This Kit includes a folding, 3-leg base as well as a soft monopod foot and a fabric storage case.
Use the 3-leg base for the best stability. A ball joint is built into the 3-leg base which allows the monopod to pan and tilt. This ball joint can be locked so the unit will not tilt but can still pan. The legs of the base can be folded-up for easy transport. A soft foot is attached to the bottom of the 3-leg base for use when the legs are folded. Additionally, the soft foot can be installed directly on to the monopod when the 3-leg base is removed. This creates a smaller, lighter rig with a more traditional, single-foot.
The main connection at the top of the Air Support is a reversible bolt that can be used to attach a camera or head. One side of the bolt is a ¼”-16 thread which is common to most cameras and some heads. The opposite side is a larger 3/8”-16 thread which is common to many heads.
The AS425 is a 4-section monopod kit with a maximum working height of 62 3/4" and a maximum load rating of 8 lbs. 13 oz. It collapses down to 24” (with the 3-leg base installed) for easy transport. For more information see the specifications section of this listing.
Key Features:
- Rapid Height Adjustment, no leg locks to fuss with
- Convertible between 3-leg base and single-foot monopod
- 3-leg base has a built-in ball joint for smooth panning and tilting
- Ball joint lock allows for smooth, even panning without tilt
- Reversible 1/4"-20 / 3/8"-16 bolt for attaching a camera or head
Specifications
Specifications
Kit Specifications
| Maximum Working Height: | 62 3/4" / 159.4 cm |
| Minimum Working Height: | 24 3/4" / 62.9 cm |
| Folded Length: | 24" / 61 cm |
| Maximum Load: | 8 lbs 13 oz / 4 kg |
| Material: | Aluminum |
| Sections: | 4 |
| Weight: | 2 lbs 1/2 oz / 0.92 kg |
Monopod Specifications
| Maximum Working Height: | 59 1/4" / 150.5 cm |
| Minimum Working Height: | 21" / 53.3 cm |
| Closed Length: | 21" / 53.3 cm |
| Weight: | 1 lb 2 oz / 0.51 kg |
Base Specifications
| Height: | 4 1/2" / 11.4 cm |
| Closed Length: | 9 1/8" / 23.2 cm |
| Weight: | 14 1/2 oz / 0.41 kg |
Note: Kit specifications are with 3-leg base installed & soft foot
Note: Monopod specifications are with soft foot installed.
Item Includes
Includes:
- AS425 Monopod
- 3-Leg, Folding Base
- Soft Monopod Foot
- Fabric Storage Case
ProMaster Air Support Monopod AS431
$ 119.95 - Sold Out
ProMaster Air Support Monopod AS431
ProMaster SKU: 5122 | Helix SKU: PR51228
Overview
Lightning-fast height adjustment without the need for traditional leg locks.
ProMaster's Air Support Monopod is lightning fast to deploy and adjust. Just pull to extend it or squeeze two buttons to retract it. Unlike a traditional monopod, the ProMaster Air Support requires no leg locks. Its unique air pressure system saves time and even allows you to fine-tune the height while shooting!
This Kit includes a folding, 3-leg base as well as a soft monopod foot and a fabric storage case.
Use the 3-leg base for the best stability. A ball joint is built into the 3-leg base which allows the monopod to pan and tilt. This ball joint can be locked so the unit will not tilt but can still pan. The legs of the base can be folded-up for easy transport. A soft foot is attached to the bottom of the 3-leg base for use when the legs are folded. Additionally, the soft foot can be installed directly on to the monopod when the 3-leg base is removed. This creates a smaller, lighter rig with a more traditional, single-foot.
The main connection at the top of the Air Support is a reversible bolt that can be used to attach a camera or head. One side of the bolt is a ¼”-16 thread which is common to most cameras and some heads. The opposite side is a larger 3/8”-16 thread which is common to many heads.
The AS431 is a 4-section monopod kit with a maximum working height of 63 1/2" and a maximum load rating of 15 lbs 7 oz. It collapses down to 24 1/8” (with the 3-leg base installed) for easy transport. For more information see the specifications section of this listing.
Key Features:
- Rapid Height Adjustment, no leg locks to fuss with
- Convertible between 3-leg base and single-foot monopod
- 3-leg base has a built-in ball joint for smooth panning and tilting
- Ball joint lock allows for smooth, even panning without tilt
- Reversible 1/4"-20 / 3/8"-16 bolt for attaching a camera or head
Specifications
Specifications
Kit Specifications
| Maximum Working Height: | 63 1/2" / 161.3 cm |
| Minimum Working Height: | 24 7/8" / 63.2 cm |
| Folded Length: | 24 1/8" / 61.3 cm |
| Maximum Load: | 15 lbs 7 oz / 7 kg |
| Material: | Aluminum |
| Sections: | 4 |
| Weight: | 2 lbs 4 1/2 oz / 1.03 kg |
Monopod Specifications
| Maximum Working Height: | 60" / 152.4 cm |
| Minimum Working Height: | 21 1/4" / 54 cm |
| Closed Length: | 21 1/4" / 54 cm |
| Weight: | 1 lb 6 oz / 0.62 kg |
Base Specifications
| Height: | 4 1/2" / 11.4 cm |
| Closed Length: | 9 1/8" / 23.2 cm |
| Weight: | 14 1/2 oz / 0.41 kg |
Note: Kit specifications are with 3-leg base installed & soft foot
Note: Monopod specifications are with soft foot installed.
Item Includes
Includes:
- AS431 Monopod
- 3-Leg, Folding Base
- Soft Monopod Foot
- Fabric Storage Case
ProMaster Professional MP528 Aluminum Monopod
$ 69.95
ProMaster Professional MP528 Aluminum Monopod
ProMaster SKU: 3564 | Helix SKU: PR3564
Overview
The ProMaster MP528 monopod is super strong and stable yet light enough to take with you anywhere. It is terrific for sports shooters, nature enthusiasts or anyone who requires versatile, lightweight support for their camera. Available in a carbon fiber version as well which, unbelievably, shaves off even more weight.
Specifications
| Monopod Material | Aluminium |
| Sections | 5-Section (28mm) |
| Sections Lock Style | Twist Lock |
| Maximum Working Height | 63" (160cm) |
| Folded Length | 17 ½'' (44cm) |
| Maximum Load | 13lbs (6kg) |
| Monopod Weight | 17.6oz (.5kg) |
| Mounting | Reversible ¼-20 / 3/8'' Mounting Thread |
| Spiked/Retractable Feet | Yes |
Item Includes
1 Qty: Storage/Carry Pouch
ProMaster Professional MPH528 Aluminum Monopod with Head
$ 109.95
ProMaster Professional MPH528 Aluminum Monopod with Head
ProMaster SKU: 4485 | Helix SKU: PR44855
Overview
The ProMaster MPH528 (N) Monopod represents the highest standards of form and function. It is constructed from rugged anodized aluminum and features a comfortable grip, fully adjustable leg, and closes to a compact size for carrying case. The precision head allows for precise vertical and horizontal alighnment along with ultra smooth panning.
For Use With:
+ SLR Cameras with standard or telephoto lens
+ Point and shoot cameras
+ Video cameras
Specifications
- 90° left and right lateral adjustment
- 360° panning with tension adjustment
- Maximum Working Height: 66 15/16" / 170cm
- Folded Length: 21-1/4" / 54cm
- Maximum Load: 13 lbs / 6 kg
- Monopod Weight: 29.3 oz / 0.83 kg
- 28mm 5-section aluminum leg
- Reversible 1/4˝-20 / 3/8˝ mounting thread
- Position of the quick release receiver on the head can be switched by 90 degrees
- Uses Quick Release Plate #7218
Item Includes
ProMaster Professional MPV428+ Monopod
$ 99.95
ProMaster Professional MPV428+ Monopod
ProMaster SKU: 5619 | Helix SKU: PR5619
Overview
The ProMaster MPV428+ Monopod is a great solution for both videography and still photography. Its retractable base incorporates a ball joint with tension lock to provide smooth, easy movements. It has three points of contact for great stability on a variety of surfaces.
The base is also removable, allowing the MPV428+ to convert to a traditional monopod with single, rubber foot. The innovative PROlocks allow for quick opening and powerful closing of the monopod sections with one hand.
Specifications
- Maximum Working Height: 64" / 162.5 cm
- Minimum Working Height: 19.5" / 49.5 cm
- Folded Length: 21 1/4" / 53.9 cm
- Maximum Load: 13 lb / 6 kg
- Monopod Weight: 1 lb 9 oz / .71 kg
- 4-Section 28mm Aluminum Leg
- Reversible 1/4-20 / 3/8" mounting thread
ProMaster Professional MPV432+ Monopod
$ 129.95
ProMaster Professional MPV432+ Monopod
ProMaster SKU: 5612 | Helix SKU: PR5612
Overview
The ProMaster MPV432+ Monopod is a great solution for both videography and still photography. Its retractable base incorporates a ball joint with tension lock to provide smooth, easy movements.
It has three points of contact for great stability on a variety of surfaces. The base is also removable, allowing the MPV432+ to convert to a traditional monopod with single, rubber foot. The innovative PROlocks allow for quick opening and powerful closing of the monopod sections with one hand. Carry case included.
Specifications
- Maximum Working Height: 67 1/4" / 170.8 cm
- Minimum Working Height: 20 1/8" / 51.1 cm
- Folded Length: 21 7/8" 55.5 cm
- Maximum Load: 15 lb / 7 kg
- Monopod Weight: 1 lb 14 oz / 0.85 kg
- 4-Section 32mm Aluminum Leg
- Reversible 1/4-20 / 3/8" mounting thread
ProMaster Scout SCM426 Aluminum Monopod
$ 39.95
ProMaster Scout SCM426 Aluminum Monopod
ProMaster SKU: 9918 | Helix SKU: PR99183
Overview
The ProMaster Scout 426 is a great everyday monopod. It uses flip-locks for quick and easy opening and closing of the 4 sections. The mounting screw is reversible so you can add a small ball head or mount your camera directly to the Scout 426. A foam grip for comfort and a wrist lanyard round out the features.
Specifications
- Maximum Working Height: 59 1/8" / 150.2 cm
- Minimum Working Height: 19 1/8" / 48.6 cm
- Folded Length: 19 3/8" / 49.2 cm
- Maximum Load: 8 lbs / 3.6 kg
- Monopod Weight: 12.25 oz / 347 g
- Sections: 4-Section (26mm, 23mm, 20mm, 19mm)
- Material: Aluminum Leg
- Camera/Head Mounting: Reversible 1/4-20 / 3/8" mounting thread
Item Includes
1 Qty: Carry/Storage Pouch.
ProMaster Specialist SPCM428K Cine Monopod Kit
$ 199.95
ProMaster Specialist SPCM428K Cine Monopod Kit
ProMaster SKU: 2442 | Helix SKU: PR24420
Overview
The ProMaster SPCM428K Specialist Cine Monopod Kit is a modular solution for shooting steady video footage.
Its SPCH20 Cine Head is a small but mighty head designed for use with mirrorless and DSLR cameras shooting video or still photos. It provides smooth tilt / pan movements and features a cushiioned handle which can be reversed for right-hand or left-hand use. Its sliding quick relelase plate lets you balance your camera properly and has a scale for quick, repeatable use. The dovetail design of the quick release plate is comatible with a variety of other ProMaster accessories as well as many industry standard items. The mult-position quick release receiver at the top of the head can be set up in various orientations for front-to-back QR plate mounting or side-to-side. Red touch points quickly identify the controls of this head. A separate panning control knob helps you achieve smooth, even pans and a marked scale at the panning base shows precise movemement. Many telephoto lenses with dovetail style (arca-swiss compatible) tripod collars work extremely well with the SPCH20 head in achieving excellent, smooth tracking of animals for wildlife photography too.
The monopod features ProMaster's PROlocks for fast opening and powerful closing of its 4 sections. It is generously tall for a viewpoint above crowds. The upper portion of the monopod can be separated and reinstalled in place of the center column on ProMaster Specialist SP528, SP528C, SP532, SP532C tripods. This modular design lets you switch between monopod and tripod fast.
The 3-point base of this kit has wide, foldable legs to provide stability. Its ball joint with tension control gives smooth movement to the entire monopod. A special collar is used to lock the monopod vertically for smooth panning. The 3-point base is removable. A rubber foot or stainless-steel spike (both included) can be attached to the monopod in its place.
The kit also includes a ground-level adapter which allows the upper portion of the monopod to be directly mounted to the 3-point base for a unique shooting perspective.
Specifications
Kit Specifications:
- Maximum Working Height: 72 1/4" / 183.5 cm
- Minimum Working Height: 12 1/4" / 31.1 cm
- Closed Length: 28 15/16" / 73.5 cm
- Weight: 3 lbs 10 oz / 1.64 kg
- Note: Min. working height is acheived with ground-level adapter & 3-point base installed
Cine Head Specifications:
- Height: 3 15/16" / 10 cm
- Weight: 14 1/4 oz / 0.43 kg
- Tilt Angle: +60 / -90
- Maximum Load: 6 lbs 9 oz / 3 kg
- Uses Quick Release Plate #1711
Base Specifications:
- Closed Length: 9 1/4" / 23.5 cm
- Weight: 1 lb 6 3/4 oz / 0.64 kg
Item Includes
Includes:
- SPCM428 Monopod
- SPCH20 Cine Head
- SPMB1 3-point, folding base
- 1711 Quick Release Plate
- Ground-level adapter
- Rubber monopod foot
- Stainless steel monopod spike
- Soft, padded hand wrap
- Fabric storage case
Studio-Assets 5-Section Aluminum Monopod
$ 39.95
Studio-Assets 5-Section Aluminum Monopod
Studio-Assets SKU: SA1440 | Helix SKU: SA1440
Overview
Whether you're shooting sports or wildlife, nothing beats the convenience of a monopod for dependable camera support. These compact and lightweight models are perfect for backpacking and sports games. Made from high-strength aluminum alloy, they can handle a load capacity of 11 pounds (5 kg). The monopod also features a unique, spring-loaded, dual-mount male thread that will accept heads with either 1/4" or 3/8" female mount. Maximum Height: 63" (160 cm); Closed Height: 18.5" (47 cm)
Specifications
| SKU | SA1440 |
|---|---|
| UPC | 854022003248 |
| PRODUCT WEIGHT | 1.5 lb (0.7 kg) |
| PACKAGE CONTENTS |
(1) x 5-Section Aluminum Monopod |
| LEG LOCK TYPE | Quick-release |
| LEG SECTIONS | 5 |
| MATERIAL | Aluminum Alloy |
| MAXIMUM HEIGHT | 63" (160 cm) |
| MAXIMUM LOAD | 11 lbs (5 kg) |
| MINIMUM HEIGHT | 18.5" (47 cm) |
| TRIPOD HEAD MOUNT | 1/4"-20 or 3/8"-16 |
Studio-Assets Pro 5-Section 8x Carbon Monopod
$ 129.95 - Sold Out
Studio-Assets Pro 5-Section 8x Carbon Monopod
Studio-Assets SKU: SA1480 | Helix SKU: SA1480
Overview
Whether you're shooting sports or wildlife, nothing beats the convenience of a monopod for dependable camera support. These compact and lightweight models are perfect for backpacking and sports games. Made from high-strength 8x carbon fiber, they can handle a load capacity of 14 pounds (6.4 kg). The monopod also features a unique, spring-loaded, dual-mount male thread that will accept heads with either 1/4" or 3/8" female mount.
Maximum Height: 73.5" (187 cm)
Closed Height: 20.5" (52 cm)
Specifications
| SKU | SA1480 |
|---|---|
| UPC | 854022003309 |
| PRODUCT WEIGHT | 2 lb (0.9 kg) |
| PACKAGE CONTENTS |
(1) x Pro 5-Section Carbon Fiber Monopod |
| LEG LOCK TYPE | Twist |
| LEG SECTIONS | 5 |
| MATERIAL | 8x Carbon Fiber |
| MAXIMUM HEIGHT | 73.5" (187 cm) |
| MAXIMUM LOAD | 14 lbs (6 kg) |
| MINIMUM HEIGHT | 20.5" (52 cm) |
| TRIPOD HEAD MOUNT | 1/4"-20 or 3/8"-16 |
Studio-Assets Pro 5-Section Aluminum Monopod
$ 84.95 - Sold Out
Studio-Assets Pro 5-Section Aluminum Monopod
Studio-Assets SKU: SA1460 | Helix SKU: SA1460
Overview
Whether you're shooting sports or wildlife, nothing beats the convenience of a monopod for dependable camera support. These compact and lightweight models are perfect for backpacking and sports games. Made from high-strength aluminum alloy, they can handle a load capacity of 33 pounds (15 kg). The monopod also features a unique, spring-loaded, dual-mount male thread that will accept heads with either 1/4" or 3/8" female mount. Maximum Height: 74" (188 cm); Closed Height: 20" (51 cm)
Specifications
| SKU | SA1460 |
|---|---|
| UPC | 854022003279 |
| PRODUCT WEIGHT | 2 lb (0.9 kg) |
| PACKAGE CONTENTS |
(1) x Pro 5-Section Aluminum Monopod |
| LEG LOCK TYPE | Twist |
| LEG SECTIONS | 5 |
| MATERIAL | Aluminum Alloy |
| MAXIMUM HEIGHT | 74" (188 cm) |
| MAXIMUM LOAD | 33 lbs (15 kg) |
| MINIMUM HEIGHT | 20" (51 cm) |
| TRIPOD HEAD MOUNT | 1/4"-20 or 3/8"-16 |
Back
